AWSI-21-v350
CONNECTING ROD
METER

CAN BE USED WITH ANY TWO-WEIGH-CELL CONROD SCALE BASE

Product Image
STANDARD FEATURES:
  • PLC driven meter
  • Hign Visibility Back-Lit Color LCD Display
  • HMI Touch Screen
  • Zero Tracking , On or Off
  • Full Digital Front Panel Calibration
  • Displayed:
    • Displays the CRANK END and PIN END Weight simultaneously.
    • Displays the TOTAL Weight
    • Displays System Information
    • Displays Simple Stats of the Part on the Weigh Cell
  • Positive "TARE" for the Unique AWS "Mass Balance" Weighing Method
  • Standard "TARE" for the Standard Method of Weighing
  • RS-232C or Rs-485 Serial Port Prints out
  • Unique Digital Filtering Technique will not Slow Down the Digital Sampling
  • Front Panel "ZERO", "PRINT"
SPECIFICATIONS:
Calibration:On-screen, Display prompted
Internal Resolution:18 bit
Thermal Stability:<0.004% °C, Zero and Span
A/D Conversion Rate:10,000 samples per second
Common Mode Rejection:140db, 0-60 Hz
Operating Temperature:0°C. to 50°C
Power:115 VAC, 50-60 Hz, 12 Watts
Linearity:4 break points, plus zero
External Resolution:Up to 20,000
Count By:1, 2, or 5
Display Rate:2½ readings per second
Sensitivity:2mv/v to 5mv/v
Communications:RS–232C, RS–485, TCP/IP
Function Keys:5 – Pre-Programmed

CALIBRATION / LINEARIZATION: MENU DRIVEN
Crank End And Pin End Are Calibrated Independent Of Each Other:

Product Image
ZERO CALIBRATE
Product Image
FIRST POINT
Product Image
SECOND POINT
Product Image
THIRD POINT
Product Image
FULL SCALE
Product Image
FULL NUMERIC KEYBOARD



Copyright© 1998 - 2019: Advance Weight Systems, Inc.

Valid CSS!

This page was last modified: