AWSI Logo AWS 21-200 SERIES
CONNECTING
ROD SCALE

THE STANDARD FOR ALL CONNECTING ROD SCALES

 

UNIQUE FEATURES:

  • MAKE MASTERS
  • CHECK MASTERS WITH TRACEABLE MASS STANDARDS
  • PROVIDE INDEPENDENT PIN END/CRANK END WEIGHT
  • ELIMINATE "WEIGHT TRANSFER" ERRORS

 

Typical Small Cradle
  • The 21-200 Series of Connecting Rod Scale Systems consists of two AWS-200 Type Weigh-Cells mounted on a common base.
  • Two digital weigh meters provide simultaneous crank end and pin end weight readings.
  • Completing the system and supported on the Weigh Cells is a CUSTOM designed three point suspension cradle which gives the independent crank end and pin end weights.
  • Includes test platforms to weigh other items such as wrist pins and pistons.

 

The distance between scales, and the length of the cradle is adjustable to handle rods of different sizes. Change-over from one rod to another is a simple, four-step procedure requiring about 5 minutes.

TYPICAL CHANGE-OVER PROCEDURE:

  • replace pilots
  • adjust scale distance to fit master rod.
  • adjust mechanical counter-balance
  • push-to-zero the digital display
TYPICAL MANUAL OPERATING RATE:
600 pieces per hour

ACTUAL WEIGH TIME:
One second

 

MODEL
NUMBER		 TOTAL ROD
CAPACITY		 MAX. C-C
DISTANCE		 DISPLAY
CALIBRATION		 DISPLAY
RESOLUTION		 MAX. WIDTH
CRANK
21-203 1 Kg 6 in. 500 g 0.1 g 3 in.
21-204 2 Kg 8 in. 1000 g 0.2 g 4 in.
21-206 4 Kg 10 in. 2000 g 0.5 g 6 in.
21-208 8 Kg 14 in. 5000 g 1 g 8 in.

ADVANCE WEIGHT SYSTEMS can supply CERTIFIED connecting rod "Master", balanced to a customer specified weight condition. The customer must supply a rod machined to drawing tolerance to all dimensions with the crank and pin end overweight. The "Master" rods will be bright nickel plated and sealed to the accuracy specified. We provide a custom wooden storage box and certificates of weight and accuracy per MIL-STD-45662A.

Special systems beyond the capacities listed are developed on a "per job" basis. Advance Weight Systems has built Connecting Rod Systems for rods weighing more that 75 Kg. and more than three feet in length.

Tell us about your application

This Page Is Valid HTML 4.01!
This Page Is Valid CSS 2.0!		      W3C® is registered in numerous countries of the World Wide Web Consortium.
No endorsement or relationship is implied.
Advance Weight Systems, Inc. displays this to show that extreme care is taken even in the design of our web sites.
Validate any web page for valid code.		 This page was last modified: