|
LOAD-CELLS |
The Extremely Versitile ADVANCE Series of Single-Point Load-Cells Feature a Hard Anodized Aircraft Aluminum Body with a positive overweight stop and a wide footprint.
With all steps of the manufacturing process taking place in our plant, these American Made products guarantee quality that cannot be achieved with any other product of its type.
The ADVANCE WEIGHT SYSTEMS "MITE", "BLOCK", and "BRICK" Load-Cells are designed to address the need for a low cost, simple single-point load-cell. These load-cells provide system builders and manufacturers a dependable and highly accurate device that is particularly well suited to any industrial process.
All ADVANCE WEIGHT SYSTEMS Load-Cells will deliver long trouble free service, even in harsh, wash down applications
| SPECIFICATIONS: | ||
| • Load-Cell: | Strain Gage, 350 Ohm Full Bridge | |
| • Safe Overload: | 200% at Center of Loading Point | |
| • Excitation: | 10 to 15 Volts D.C. | |
| • Temperature Coeffecient: | 0.003 %, Span & Zero | |
| LOAD CELL TYPE | MITE | BLOCK | BRICK |
|---|---|---|---|
| Full Scale Range | 2 , 2.5 Kg | 5, 10, 20, 25 Kg | 50, 100, 200, 250 Kg |
| Sensitivity | 2.0 (mv/volt) | 2.0 (mv/volt) | 2.0 (mv/volt) |
| Repeatability | ±0.01 | ±0.01 | ±0.01 |
| Linearity | ±0.02 | ±0.02 | ±0.02 |
| Hysteresis | ±0.01 | ±0.01 | ±0.01 |
| Creep | ±0.02 | ±0.02 | ±0.02 |
 |
  |
W3C® is registered in numerous countries of the World Wide Web Consortium. No endorsement or relationship is implied. Advance Weight Systems, Inc. displays this to show that extreme care is taken even in the design of our web sites. Validate any web page for valid code. |
This page was last modified:
|